Lighter and faster, stronger and simpler, the entire range of Racing Blocks are designed to achieve the best strength to weight ratio while remaining race legal. Blocks range in size from 27 to 250mm and come in various forms including single and becket, doubles, triples, ratchet, fiddle, high load, stand-ups, halyard, runner and footblocks. Two types of block are available: one with roller bearings for rapid sheet trim and the other with plain bearings for high static loads.
Monocoque construction offers the best strength to weight ratio by incorporating the head block and bearing surface into the cheeks.
Patented bayonet fixing means that central fastenings are not required and only two locating screws are needed in the head, further reducing weight and improving performance.
Flush fixings and radiused edges produce snag free cheeks with engraved logo and block size.
The three position shackle post has a drilled out head for further weight reduction.
Torlon rollers and Delrin side thrust balls provide optimum bearing for rapid line handling.
Torlon rollers on blocks above 80mm. Captive Delrin side thrust balls will not drop out when sheave is removed.