Edson Marine

Connecting bar for Edson Stainless Davits. Adds rigidity and support to davits. Also provides a hand hold when getting in and out of davit. 1-1/4" dia. x 60" long. Custom lengths available - contact Edson customer service at (508) 995-9711 for more info.

This Spares Kit includes 1) 113N-0 Diaphragm, 1) 160-G-107 Check Valves, 1) 160-G-108 and 2) 160-A-1200 Sealing Washer, the replacement elastomer part of an Edson Models 554 and 638 Bottom Inlet One Gallon Per Stroke Manual Pumps. Nitrile is an elastomer with very good dynamic strength and is highly resistant to the effects of oils and general waste products.

This Spares Kit includes 1) 113N-0 Diaphragm, 2) 160-G-107 Check Valves and 2) 160-A-1200 Sealing Washers, the replacement elastomer part for an Edson Models 120 Power Pumps and Models 117 and 557 Side Inlet One Gallon Per Stroke Manual Pumps. Nitrile is an elastomer with very good dynamic strength and is highly resistant to the effects of oils and general waste products.

This Spares Kit includes 1) 113N-18 Diaphragm, 2) 160-A-1207 Check Valves and 2) 160-A-1253 Sealing Washers, the replacement elastomer part for an Edson Models 220 Power Pumps and Models 217, 254, 256 and 258 18 GPM Manual Pumps. Nitrile is an elastomer with very good dynamic strength and is highly resistant to the effects of oils and general waste products.

VerticalPowder coated aluminumRound TopNo light arm attachmentRequires Vision Mounting Plate to install radar or sat dome antennaDocumentationDimensioned DrawingMarine Electronics Mounting Systems CatalogVision Series NavCom Tower Installation Instructions

These classic Nautical Stars are cast in solid stainless and are highly polished for a gleaming silver look. They are perfect for plaques, add a nautical touch to homes when mounted to railing posts or doors, or make a great desk paper weight for your favorite boater. Dress up your boat’s transom on either end of your boat’s name - it will make her shine! Don’t just name a star after someone, give them their very own! Any where you want that classic nautical look, these stars are the perfect...

These classic Nautical Stars are cast in solid stainless and are highly polished for a gleaming silver look. They are perfect for plaques, add a nautical touch to homes when mounted to railing posts or doors, or make a great desk paper weight for your favorite boater. Dress up your boat’s transom on either end of your boat’s name - it will make her shine! Don’t just name a star after someone, give them their very own! Any where you want that classic nautical look, these stars are the perfect...

These classic Nautical Stars are cast in solid stainless and are highly polished for a gleaming silver look. They are perfect for plaques, add a nautical touch to homes when mounted to railing posts or doors, or make a great desk paper weight for your favorite boater. Dress up your boat’s transom on either end of your boat’s name - it will make her shine! Don’t just name a star after someone, give them their very own! Any where you want that classic nautical look, these stars are the perfect...

This powder coated marine-grade aluminum plate is used to mount a Simrad Halo Open Array on a hard top. The lifted mounting surface prevents drilling through an internal center conduit on many hard tops. This product is used independently and is not compatible with the other Vision Series Mounts and Plates. To mount a Simrad Halo Open Array on a Vision Series Mount/Tower, use Vision Mounting Plate #68575. DocumentationDimensioned DrawingMarine Electronics Mounting Systems CatalogVision Series...

Edson’s Wheel Flange Adapter allows Edson’s lightweight Diamond Series and Carbon Fiber flanged mount steering wheels to mount directly onto Edson’s tapered Wheel Shafts. It is recessed to allow room for tightening the wheel nut and can be used with Edson’s convenient Thru-Shaft Wheel Brakes. Investment cast and polished 316 Stainless.

Edson’s Pedestal Top Adapters allow you to adapt nearly any compass to an Edson pedestal. They can also be used as a pedestal cover when not installing a compass. They are available in white marine-grade polymer. Furnished with pre-drilled holes and flat head machine screws to attach to Edson Pedestals. The #694WH-6-45 allows a 5” dial compass with 7” (178 mm) base to be adapted to the Edson #402 or #464 Classic CD-i Pedestal. Wt. 1 lb (.45 kg).

Designed especially for Edson’s #476 Vision II Compact Pedestal. Recessed versions also available.

Designed especially for Edson’s #476 Vision II Compact Pedestal. Recessed versions also available.

Edson’s Compact Idler - designed especially for Edson’s #476 Vision II Compact Pedestal. Recessed versions also available.

Edson’s Compact Idler - designed especially for Edson’s #476 Vision II Compact Pedestal. Recessed versions also available.

Designed to raise Loran or GPS Antennas above the Radar beam or to provide a mounting adapter for VHF antennas. Made of 1” O.D. heavy duty stainless tubing with a 1”-14 thread on top. 3” dia. mounting base.

Designed to raise Loran or GPS Antennas above the Radar beam or to provide a mounting adapter for VHF antennas. Made of 1” O.D. heavy duty stainless tubing with a 1”-14 thread on top. 3” dia. mounting base.

37" wide. Uses 6865 Light Arm. DocumentationDimensioned DrawingMarine Electronics Mounting Systems CatalogVision Series NavCom Tower Installation Instructions

Made from investment cast 316 stainless, fitting all antennas up to 1.5" in diameter, the standoff virtually eliminates the need to shim the standoff or antenna base. The clasp is held closed with a quick release pin allowing for quick antenna takedown to go under bridges or for trailering. The combination of a highly polished and vapor blast gray finish enhance the sleek, attractive styling.

Made from investment cast 316 stainless, fitting all antennas up to 1.5" in diameter, the standoff virtually eliminates the need to shim the standoff or antenna base. The clasp is held closed with a quick release pin allowing for quick antenna takedown to go under bridges or for trailering. The combination of a highly polished and vapor blast gray finish enhance the sleek, attractive styling.

Made from investment cast 316 stainless, fitting all antennas up to 1.5" in diameter, the standoff virtually eliminates the need to shim the standoff or antenna base. The clasp is held closed with a quick release pin allowing for quick antenna takedown to go under bridges or for trailering. The combination of a highly polished and vapor blast gray finish enhance the sleek, attractive styling.

Flat head stainless steel bolts are available for boats with pedestals installed prior to February 1987. Stainless nuts are included.Sold as a set of four with Teflon-based corrosion inhibitor.

Flat head stainless steel bolts are available for boats with pedestals installed prior to February 1987. Stainless nuts are included.Sold individually - four required.

Since 1987, all Edson Pedestals use the exclusive Edson Hex Head Aluminum Bolts. With this improvement they lock in place and require only one person to tighten them. They fit flush with the base and the aluminum alloy is the same as the base thus eliminating all reaction from dissimilar metals. Aluminum nuts are included.Sold individually - four required.

Since 1987, all Edson Pedestals use the exclusive Edson Hex Head Aluminum Bolts. With this improvement they lock in place and require only one person to tighten them. They fit flush with the base and the aluminum alloy is the same as the base thus eliminating all reaction from dissimilar metals. Aluminum nuts are included. Sold individually - four required.

Since 1987, all Edson Pedestals use the exclusive Edson Hex Head Aluminum Bolts. With this improvement they lock in place and require only one person to tighten them. They fit flush with the base and the aluminum alloy is the same as the base thus eliminating all reaction from dissimilar metals. Sold individually - four required.

Size 30 Bottom Inlet Lever-Action Pump - Aluminum - 2" Inlet & Discharge - Nitrile Diaphragm and Valves

Size 30 Bottom Inlet Lever-Action Pump - Aluminum - 1 1/2" Inlet & Discharge - Nitrile Diaphragm and Valves

Size 30 Bottom Inlet Lever-Action Pump - Bronze - 2" Inlet & Discharge - Nitrile Diaphragm and Valves

Size 30 Bottom Inlet Lever-Action Pump - Bronze - 1 1/2" Inlet & Discharge - Nitrile Diaphragm and Valves