Products 241-288 of 1130
Show
Edson - Engine Control, Clutch & Throttle Control w/Stainless Handle
Price: $469.00
View
Availability: Available
Edson Marine Item #: 12-870st-45 -

Edson’s Standard Clutch and Throttle Control features matching stainless control handles which are conveniently located on each side of the pedestal and are clearly marked for “Forward” and “Reverse”, “Fast” and “Slow”. For precision speed control there is a Throttle Friction Adjustment Screw inside the housing. This control is easy to install and can be used with any transmission that uses 33 Series (Edson #734) cables such as: Hurth and Borg Warner Velvet Drive Transmissions typically found...

Edson - Engine Control, Clutch/Throttle Control
Price: $459.00
View
Availability: Available
Edson Marine Item #: 12-816st-45 -

Edson Clutch and Throttle Control is designed for transmissions that go into reverse when the cable is extended at the pedestal end. Also for harder to shift transmissions. Only for transmissions that specify 33 Series (Edson #734) Control Cables. The clutch handle is 6” (152mm) long and is easily operated up and down by reaching over the wheel. The Throttle Handle is polished Stainless and clearly marked for “Fast” and “Slow” speeds. A Throttle Friction Adjustment Screw and a Clutch Travel...

Edson - Engine Control, Single Lever Side Mt-Morse-Taper SS Handle
Price: $436.00
View
Availability: Available
Edson Marine Item #: 12-910-sl3-taper -

Edson Single Lever Engine Handle, Faceplate and Morse SL3 Mechanism are also available alone for bulkhead mounting.• Single Lever for intuitive Control• Utilizes Series 33 Control Cables• Neutral Lock Out Mechanism Revs Engine for Battery Charging• Can mount on any Vertical Bulkhead (up to 1/2" thick)• Stainless Handle, Stainless Faceplate, and Gasket included

Edson - Engraving Charge -  Engrave:_____________
Price: $116.40
View
Availability: Available
Edson Marine Item #: 12-32500 -

Edson - Faceplate, Needle Bearing - Bronze
Price: $195.00
View
Availability: Available
Edson Marine Item #: 12-795br-1nb -

Edson - Faceplate, Needle Bearing - Chrome
Price: $260.00
View
Availability: Available
Edson Marine Item #: 12-795ch-1nb -

Edson - Faceplate, Round - Bronze
Price: $66.00
View
Availability: Available
Edson Marine Item #: 12-795br-1 -

Edson - Faceplate, Round - Chrome
Price: $112.00
View
Availability: Available
Edson Marine Item #: 12-795ch-1 -

Edson - Faceplate, Stainless w/Self Aligning Bearing
Price: $232.00
View
Availability: Available
Edson Marine Item #: 12-795st-1-sanb -

Edson - Fiberglass Mounting Sleeve
Retail: $401.00
Price: $370.12
View
Availability: Available
Edson Marine Item #: 12-985-35-55 -

The most popular and versatile mounting system is the Thru-Deck Tube Mount. A heavy-duty fiberglass tube is simply fitted through a hole in the deck and fiberglassed to the underside of the deck and the hull. The mast slides into the tube and is pinned to prevent rotation. This installation is fast and facilitates easy seasonal removal. For Deluxe Radar Masts 3-1⁄2”. Easily cut to fit any hull form. 55" long.

Edson - Fiberglass Mounting Sleeve
Retail: $297.00
Price: $274.13
View
Availability: Available
Edson Marine Item #: 12-985-23-55 -

The most popular and versatile mounting system is the Thru-Deck Tube Mount. A heavy-duty fiberglass tube is simply fitted through a hole in the deck and fiberglassed to the underside of the deck and the hull. The mast slides into the tube and is pinned to prevent rotation. This installation is fast and facilitates easy seasonal removal. For Standard Radar Mast - 2-3⁄8”. 55" long.

Edson - Flushmount Kit for Large Displays, Stainless
Retail: $65.00
Price: $59.99
View
Availability: Available
Edson Marine Item #: 12-67700 -

Edson - Flushmount Kit for VHF/Small Displays, Stainless
Retail: $81.00
Price: $74.76
View
Availability: Available
Edson Marine Item #: 12-67650 -

Edson - FOOT VALVE W/STRAINER, BRONZE, 1.5" FNPT, NITRILE
Price: $193.00
View
Availability: Available
Edson Marine Item #: 12-130n-150 -

Edson's Foot Valve w/ bronze strainer and Nitrile check valve keeps debris and stones out of your pump while maintaining a prime in the suction line. It come equipped with mounting studs on the strainer so it can be fixed for permanent installations. Ideal for boat bilge and sump application. This Edson Foot Valve has 1½" FNPT (Female National Pipe Threads) for easy attachment to hose or pipe fittings ending with 1½" MNPT (Male National Pipe Threads).

Edson - FOOT VALVE W/STRAINER, BRONZE, 2: FNPT NITRILE
Price: $193.00
View
Availability: Available
Edson Marine Item #: 12-130n-200 -

Edson's Foot Valve w/ bronze strainer and Nitrile check valve keeps debris and stones out of your pump while maintaining a prime in the suction line. It come equipped with mounting studs on the strainer so it can be fixed for permanent installations. Ideal for boat bilge and sump application. This Edson Foot Valve has 2" FNPT (Female National Pipe Threads) for easy attachment to hose or pipe fittings ending with 2" MNPT (Male National Pipe Threads).

Edson - GHose Adpt 075 FNPT X 075 MGHT
Price: $3.00
View
Availability: Available
Edson Marine Item #: 12-14306 -

Edson - GHose Adpt 075 MNPT X 075 FGHT
Price: $3.00
View
Availability: Available
Edson Marine Item #: 12-14307 -

Edson - GHose Adpt 075 MNPT x 075 MGHT
Price: $7.00
View
Availability: Available
Edson Marine Item #: 12-14305 -

Edson - GPS Antenna Rail Ball Mount
Price: $123.00
View
Availability: Available
Edson Marine Item #: 12-831st-1-14 -

Edson’s Stainless GPS Antenna Rail Mount Arm features a unique design that keeps your wiring completely hidden inside the mount and railing. The two-piece design clamps to any 1”, 1-1/8” or 1-1/4” horizontal railing. Male 1”-14 threads accept most common GPS or VHF antennas. Cast of solid 316 stainless with rubber bushings.

Edson - Guard Pipe ONLY, 58" High 1-1/8 Angled, LESS FEET
Price: $379.00
View
Availability: Available
Edson Marine Item #: 12-960-b-784 -

58" Tall, Angled, 1-1/8" diameter guard tubing only. Does not include Top Plate or Mounting Feet.

Edson - Guard Pipe ONLY, 58" High 1-1/8 Straight, LESS FEET
Price: $353.00
View
Availability: Available
Edson Marine Item #: 12-960-b-781 -

58" Tall, Straight, 1-1/8" diameter guard tubing only. Does not include Top Plate or Mounting Feet.

Edson - Guard Pipe ONLY, 58" High 1-1/8" Offset, LESS FEET
Price: $379.00
View
Availability: Available
Edson Marine Item #: 12-960-b-782 -

58" Tall, Offset, 1-1/8" diameter guard tubing only. Does not include Top Plate or Mounting Feet.

Edson - Guard Top Plate, 1-1/8 Guards Stainless w/Bushings & Gaskets
Price: $151.00
View
Availability: Available
Edson Marine Item #: 12-1625st-6 -

Edson’s Stainless Top Plate is made of Investment-cast 316 Stainless and polished to a mirror finish. It will accommodate 1”, 1-1/8” and 1-1/4” pedestal guard tubing on 9-1/2” centers with the provided plastic bushings. These also provide rattle-free isolation between the stainless tubes and top plate, making removal in the future easier.

Edson - Guard Top Plate, 1-1/8 Guards Stainless w/Bushings & Gaskets
Price: $127.00
View
Availability: Available
Edson Marine Item #: 12-1625st-45 -

Edson’s Stainless Top Plate is made of investment-cast 316 Stainless and polished to a mirror finish. It will accommodate 1”, 1-1/8” and 1-1/4” pedestal guard tubing on 9-1/2” centers with the provided plastic bushings. Provides rattle-free isolation between the guard tubes and top plate, making future removal easier.

Edson - Guard, 1-1/8 Angled Guard 58" w/Std Stainless Top Plate
Price: $526.00
View
Availability: Available
Edson Marine Item #: 12-1620-6-58a -

Gives you extra room to install Instrument Housings, Radar Pods or multiple displays while the new angle increases their visibility.Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet. This version is for Edson #400, 402, 464 CDi Pedestals with 8" top diameter. 58" tall, angled.

Edson - Guard, 1-1/8 Angled Guard 58" w/Std Stainless Top Plate
Price: $488.00
View
Availability: Available
Edson Marine Item #: 12-1620-45-58a -

Gives you extra room to install Instrument Housings, Radar Pods or multiple displays while the new angle increases their visibility. Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet. This version is for Edson #335, 336 and 337 Pedestals with 6-7/8" Top Plates. 58" tall, 18 degree angle. Provides protection for your compass, a convenient handhold and the ability to mount Instrument Housings, Radar Pods or multiple displays while increasing their visibility.

Edson - Guard, 1-1/8 Offset Guard 58" w/Std Stainless Top Plate
Price: $495.00
View
Availability: Available
Edson Marine Item #: 12-1610-45-58os -

Edson’s most versatile Guard, the Offset Guard provides you with better instrument visibility because we have moved the instruments forward by 7” (124.5 cm).Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet. This version is for Edson #335, 336 and 337 Pedestals with 6-7/8" Top Plates. 58" tall, offset. Provides protection for your compass, a convenient handhold and the ability to mount Instrument Housings, Radar Pods or multiple displays while increasing their...

Edson - Guard, 1-1/8 Offset Guard w/Std Stainless Top Plate
Price: $510.00
View
Availability: Available
Edson Marine Item #: 12-1610-6-58os -

Edson’s most versatile Guard, the Offset Guard provides you with better instrument visibility because we have moved the instruments forward by 7” (124.5 cm).Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet. This version is for Edson #400, 402, 464 CDi Pedestals with 8" Top Plates. 58" tall, offset.

Edson - Guard, 1-1/8 Straight Guard 58" w/Std Stainless Top Plate
Price: $490.00
View
Availability: Available
Edson Marine Item #: 12-1600-6-58s -

Provides protection for your compass, a convenient handhold and the ability to mount Instrument Housings, Radar Pods or multiple displays while increasing their visibility.Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet. This version is for Edson #400, 402, 464 CDi Pedestals with 8" top diameter. 58" tall, straight.

Edson - Guard, 1-1/8 Straight Guard 58" w/Std Stainless Top Plate
Price: $464.00
View
Availability: Available
Edson Marine Item #: 12-1600-45-58s -

Edson Pedestal Guard Kit includes Stainless Guard Pipe, Top Plate and Mounting Feet. This version is for Edson #335, 336 and 337 Pedestals with 6-7/8" Top Plates. 58" tall, straight.Provides protection for your compass, a convenient handhold and the ability to mount Instrument Housings, Radar Pods or multiple displays while increasing their visibility.

Edson - Handle, Clutch - Stainless
Price: $72.00
View
Availability: Available
Edson Marine Item #: 12-963pt-55 -

Upgrade your older Edson controls with these stainless replacements. Highly polished, marked “Fwd-Rev”. Can be easily retrofitted onto existing Edson engine controls. Includes mounting screw.IMPORTANT: These handles are only for Edson's Dual Lever Engine Controls. Older pedestals (pre-1980) with 10-32 set screw threads must be retapped to 1/4"-28 in order to accept the mounting screws supplied with these handles.

Edson - Handle, Throttle - Stainless
Price: $72.00
View
Availability: Available
Edson Marine Item #: 12-963sb-55 -

Upgrade your older Edson controls with these stainless replacements. Highly polished, marked “Fast-Slow”. Can be easily retrofitted onto existing Edson engine controls. Includes mounting screw.IMPORTANT: These handles are only for Edson's Dual Lever Engine Controls. Older pedestals (pre-1980) with 10-32 set screw threads must be retapped to 1/4"-28 in order to accept the mounting screws supplied with these handles.

Edson - Hardware Kit for Console Mount
Price: $294.00
View
Availability: Available
Edson Marine Item #: 12-785-761-c28 -

Hardware Kit for #737 Drop Leaf and #761 Luncheon Tables for Console mounting

Edson - Hardware Kit for Fig 737-95 Drop Leaf Table - CLAMP STYLE
Price: $459.00
View
Availability: Available
Edson Marine Item #: 12-785-737-95 -

Includes 4 stainless table hinges not shown in photo. Clamps are built to accommodate 1", 1-1/8", and 1-1/4" guard pipe diameters. For more information, click here.

Edson - Hardware Kit for Wire Type Stop
Price: $109.00
View
Availability: Available
Edson Marine Item #: 12-862-wire -

Tether style Rudder Stop. Customer supplied wire.

Edson - Hardware Kit ONLY Fig 761-95 Luncheon Table - CLAMP STYLE
Price: $247.00
View
Availability: Available
Edson Marine Item #: 12-785-761-95 -

Clamps are built to accommodate 1", 1-1/8", and 1-1/4" guard pipe diameters. For more information, click here.

Edson - HARDWARE TENSIONING KIT,  1/4" WIRE
Price: $80.00
View
Availability: Available
Edson Marine Item #: 12-77001 -

Edson - HARDWARE TENSIONING KIT, 3/16 WIRE
Price: $78.00
View
Availability: Available
Edson Marine Item #: 12-77000 -

Edson - HARDWARE TENSIONING KIT, 5/16 WIRE
Price: $109.00
View
Availability: Available
Edson Marine Item #: 12-77002 -

Edson - Horizontal Rail Accessory Mount with 3" Disk
Price: $144.00
View
Availability: Available
Edson Marine Item #: 12-831st-3-disk -

Stainless clamp-on ball mount for horizontal rail. Includes a 3" poly platform for mounting GPS brackets and other accessories. Ideal for mounting hand-held instruments on the pedestal guard, within easy reach of the helmsman and crew. The 3” disk is pre-drilled and tapped to accept Garmin’s Marine Mount for handhelds and small chartplotters. Fits 1”, 1 1/8” and 1 ¼” tubing.(GPS and bracket not included).

Edson - Horizontal Rail Accessory Mount with 5" Disk
Price: $157.00
View
Availability: Available
Edson Marine Item #: 12-831st-5-disk -

Stainless clamp-on ball mount for horizontal rail. Includes a 5" diameter poly platform for mounting GPS brackets and other accessories. Ideal for mounting hand-held instruments on the pedestal guard, within easy reach of the helmsman and crew. Fits 1”, 1 1/8” and 1 ¼” tubing.(GPS and bracket not included).

Edson - Hose Barb Coupling - 1.5" MNPT x 1-1/2"  Barb PP
Price: $8.00
View
Availability: Available
Edson Marine Item #: 12-159ma-150ny -

Edson - Hose Barb Coupling - Threaded Male 2" Nylon
Price: $11.00
View
Availability: Available
Edson Marine Item #: 12-159ma-200ny -

Edson - Hose, 1-1/2" ID Gray Flex
Price: $5.00
View
Availability: Available
Edson Marine Item #: 12-671fh-150 -

Edson Flex Hose 1½" ID is an extremely durable, light weight, crush-proof, all plastic hose. Flex Hose offers superior flexing characteristics and very good abrasion resistance. Enter total feet of hose required in 'add to cart' box (100' max continuous length).