Magnum Energy Part Number: MS2012-L-U
Marine.com Part Number: 10-mgnms2012lu

Product Status: Back Order

ETA Date: 11/29/2021
Price: $2,154.60
Retail: $2,394.00
You Save: $239.40 (10.0%)

    Quantity:

    The MS Series Inverter/Charger from Magnum Energy ? a pure sine wave inverter designed specifically for the most demanding mobile and off grid applications. The MS Series is powerful, easy-to-use, and best of all, cost effective.

    Power Factor Corrected (PFC) Charger: Our PFC charger is built into all of our inverter chargers. It uses less energy from a generator than a standard charger ? using 25-30% less AC current than standard chargers.

    Safe and reliable: The MS2000, MS2012, MS2812, and MS4024 are ETL Listed to the stringent requirements of UL/cUL 458 for mobile use and the MS2012, MS2812, and MS4024 are ETL Listed UL 1741 and CSA C22.2 #107.1-01 for renewable energy installations. All models also meet KKK-A-1822E standards for emergency vehicle use.

    Easy-to-install: Install the MS Series in four easy steps: simply connect the inverter?s output to your distribution circuits or electrical panel, connect your utility power cable to the inverter?s easy-to-reach terminal block, connect the batteries, and switch on the power

    Features:

    Pure sine wave: Power your T.V.s, stereos, plasma screens, and other sensitive electronics without worry. The pure sine wave inverter and power factor corrected charger provide clean, reliable inverter power with low total harmonic distortion (THD) of less than 5%.

    Choices: The MS Series comes in 12 and 24 volt configurations, allowing you to choose the model that is right for you.

    Versatile mounting: Mount the MS Series on a shelf, bulkhead, or even upside down.

    Lightweight: The lightweight aluminum base and cover also provides noise reduction and corrosion resistance.

    Multiple ports: The MS Series provides multiple ports, including an RS485 communication port for network expansion, and a remote port.

    Accessible design: The extra large AC access cover with terminal screw block and 360° DC connection terminals with covers make this inverter more accessible when it needs to be.

    Convenient switches: The MS Series comes with an on/off inverter-mounted switch with an easy-to-read LED indicator.

    Expanded transfer relay: 60 Amp transfer service is available on all models.

    Buy with ease: The MS Series is backed by a three-year (36-month) limited warranty

    Specification MS2000 MS2012 MS2812 MS4024
    Input battery voltage range 9 -17 VDC 9 - 17 VDC 9 - 17 VDC 18 - 34 VDC
    Nominal AC output voltage 120 VAC 120 VAC 120 VAC 120 VAC
    Outpput frequency and accuracy 60 Hz ± 0.04% 60 Hz ± 0.04% 60 Hz ± 0.04% 60 Hz ± 0.04%
    Tptal harmonic distortion (THD) <5% <5% <5% <5%
    1 msec surge current (amps AC) 50 50 70 120
    100 msec surge current (amps AC) 33 33 40 72
    5 sec surge power (real watts) 3300 3300 3900 5800
    30 sec surge power (real watts) 3100 3100 3800 5400
    5 minute surge power (real watts) 2800 2800 3200 4900
    30 minute surge power (real watts) 2200 2200 3000 4500
    Continuous power output at 25° C 2000 VA 2000 VA 2800 VA 4000 VA
    Rated input battery current 225 ADC 225 ADC 267 ADC 204 ADC
    Inverter efficiency 89% 89% 88% 87%
    Transfer Time 16 msecs 16 msecs 16 msecs 16 msecs
    Search Mode (typical) 5 watts 7 watts 7 watts 7 watts
    no Load (120 VAc output, typical) 25 watts 25 watts 30 watts 25 watts
    Wave Form Pure Sine Wave Pure Sine Wave Pure Sine Wave Pure Sine Wave
    Charger Specifications
    Continuous output at 25° C 100 ADC 100 ADC 125 ADC 105 ADC
    Charger efficiency 85% 85% 85% 85%
    Power factor >.95 >.95 >.95 >.95
    Input current at rated output (AC amps) 15 15 18 29
    General Features and Capabilities
    Transfer relay capability MS2000: 30 A single input
    MS2012, MS2812, MS4024: 2 legs at 30 A for 120 V/30 A or 240 V/60 A service
    Five stage charging capability Bulk, Absorb, Float, Equalize (requires remote), and Battery Saver™
    Battery temperature compensation Yes, 15 ft Battery Temp Sensor standard
    Remote available (optional) Yes, MM-RC or ME-RC
    Internal cooling 0 to 120 cfm variable speed drive using dual 92mm brushless DC fans
    Over current protection Yes, with overlapping circuits
    Over temperature protection yes on transformer,MOSFETS, and battery
    Conformal coating on PCB?s for corrosion protection Yes
    Powder coated chassis & top for corrosion protection Yes
    Stainless steel fasteners for corrosion protection Yes
    Dual AC branch rated output breakers 20A on MS2000-20B
    Listings ETL Listed to UL/cUL 458, UL 1741, CSA C22.2 #107.1-01, meets KKK-A-1822E standard
    Warranty 3 Years
    Enviromental Specifications
    Operating temperatures -20° C to +60° C (-4° F to 140° F)
    Non-operating temperature -40° C to +70° C (-40° F to 158° F)
    Operating Humidity 0 to 95% RH non condensing
    Physical specifications
    Dimensions (l x w x h) 13.75? x 12.65? x 8.0? (34.9 cm x 32.1 cm x 20.3 cm)
    Mounting Shelf (top or bottom up) or bulkhead (vents up)
    Weight 40 lb 42 lb 55 lb 55 lb
    Number of questions: 0