Products 1-48 of 2374
Show
Availability: Back Order
ANDERSEN
Item #: 11-55003 -
28 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully...
Availability: In Stock
ANDERSEN
Item #: 11-55004 -
34 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully...
Availability: In Stock
ANDERSEN
Item #: 11-55005 -
40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully...
Availability: Back Order
ANDERSEN
Item #: 11-55006 -
40 ST FS - 2-Speed Self-Tailing Manual Winch - Full Stainless SteelIf you take pride in having your yacht look its best, ANDERSEN's Full Stainless Self-Tailing Winch creates the dock-stopping appeal you desire. It combines all the convenience and power of ANDERSEN's self-tailing winch with a stunning all stainless steel look.From top to bottom the drive shaft stripper arm, self-tailing jaws, drum and upper & lower trim rings are manufactured in highest quality and beautifully...
Availability: In Stock
ANDERSEN
Item #: 11-55011 -
Large Bailer - Outside MountFlange Size: - 80 x 142mm (3-3/16 x 5-9/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features:Effective and reliable means of automatic bailingMade of stainless steel and guaranteeing years of trouble free servicing ...
Availability: In Stock
ANDERSEN
Item #: 11-55007 -
Mini Bailer - Outside MountFlange Size: - 56 x 92mm (2-1/4 x 3-5/8")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features:Effective and reliable means of automatic bailingMade of stainless steel and guaranteeing years of trouble free servicing ...
Availability: In Stock
ANDERSEN
Item #: 11-55010 -
Super Max Bailer - Inside MountFlange Size: - 78 x 135mm (3-1/8 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features:Effective and reliable means of automatic bailingMade of stainless steel and guaranteeing years of trouble free servicing ...
Availability: In Stock
ANDERSEN
Item #: 11-55009 -
Super Medium Bailer - Inside MountFlange Size: - 67 x 135mm (2-11/16 x 5-5/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.Features:Effective and reliable means of automatic bailingMade of stainless steel and guaranteeing years of trouble free servicing ...
Availability: Back Order
ANDERSEN
Item #: 11-55008 -
Super Mini Bailer - Indside MountFlange Size: - 61 x 106mm (2-7/16 x 4-3/16")The ANDERSEN automatic bailers are available world wide and recognized by dinghy sailors as the most effective and reliable means of automatic bailing.ANDERSEN Bailers are made of Stainless Steel, guaranteeing you many years of trouble free service.The Super Mini Special Bailer is designed for racing dinghies where the bailer is operated from a hiking position, this bailer is mounted without spring lever.Features:Effec...
Availability: In Stock
Attwood Marine
Item #: 11-52329 -
Boater's Storage BoxKeep your maps, electronics, and other equipment safe while on the water. Perfect for use on the boat, at the dock, at home or in the field. Our O-ring lid is water-resistant and helps to seal out moisture (not intended to be 100% waterproof). The lift out tray is great for organizing small items and the flip up lid provides easy access to your stored items. The flip latch provides a secure method to keep your belongings secure.
Availability: In Stock
Attwood Marine
Item #: 11-52324 -
Cell Phone / GPS CaddyStorage caddies keep your boat organized. Easy-to-mount suction cups stay secure, even in rough conditions. Caddies can be mounted in back or on the bottom and can be permanently attached with screws.Holds most handheld GPS units, hand held radios and cell phonesCan be mounted with included suction cups or permanently mounted with separately purchased screwsNon-corrosie white plasticWARNING: This product can expose you to chemicals which are known to the State of...
Availability: In Stock
Attwood Marine
Item #: 11-52323 -
Cockpit CaddyStorage caddies keep your boat organized. Easy-to-mount suction cups stay secure, even in rough conditions. Caddies can be mounted in back or on the bottom and can be permanently attached with screws.Great for organizing fishing gear of personal itemsHas slots for filet knife, pliers and over 22 lures(NOT Included)Can be mounted with included suction cups or permanently mounted with separately purchased screwsNon-corrosive white plasticWARNING: This product can expose you to...
Availability: In Stock
Attwood Marine
Item #: 11-52328 -
Cooler Mounting KitCoolers corners stay put with straps to prevent injury, boat and cooler damageQuick disconnect strap designCorrosion proofFastens with #8 screws
Availability: In Stock
Attwood Marine
Item #: 11-69852 -
Fold-Up Drink Holder - Dual Ring - BlackHolds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly and easily on boats or RVs. Flip the small ring up to hold small drinks; for large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. 7/8" closed depth. Four holes for #10 screws.
Availability: In Stock
Attwood Marine
Item #: 11-69853 -
Fold-Up Drink Holder - Dual Ring - WhiteHolds coffee mugs with a handle, 12-ounce cans, or drink insulators. Mount quickly and easily on boats or RVs. Flip the small ring up to hold small drinks; for large drinks, flip the small ring down and use the large ring. When not in use, flip rings down and close the cover for convenient storage. 7/8" closed depth. Four holes for #10 screws.
Availability: In Stock
Attwood Marine
Item #: 11-52327 -
Lure RackHolds up to 25 luresA place to put a filet knife and pliersCan be mounted with included suction cups or permanently mounted with separately purchased screwsWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...
Availability: In Stock
Attwood Marine
Item #: 11-58240 -
Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance.Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple propsBuilt of durable plasticWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...
Availability: Back Order
Barton Marine
Item #: 11-65546 -
Deck Organizer - 3 Sheave - Size 2Designed for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with 'Spectro' grey anodized finish. Sheaves are from molded Acetal with hollow stainless rivets to allow easy and tidy fitting.Specifications:Length: 205mm (8.07")Width: 38mm (1.50")Height: 28mm (1.10")Weight: 290g (0.64lbs) ...
Availability: Back Order
Barton Marine
Item #: 11-66521 -
"Cruiser" Insert PackIncludes:MainGenoa 1Spin Halyard 1Topping LiftSpin pole upSpin pole downBlank
Availability: Back Order
Barton Marine
Item #: 11-66522 -
"Racer" Insert PackIncludes:Reef 1CunninghamReef 2KickerMainsheetGenoa FurlingGenoa 2Spin Halyard 2BackstayOuthaulDownhaulBlank
Availability: Back Order
Barton Marine
Item #: 11-66889 -
'S' HookA handy fitting with a multitude of uses. Manufactured from stainless steel. Bar Diameter: 6mmLength: 73mmWidth: 19mm
Availability: Back Order
Barton Marine
Item #: 11-56753 -
'K' Cam Pillar Fairlead - MaxiThese add-ons enable the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind. Stainless steel pillars add strength and wear resistance.
Availability: Back Order
Barton Marine
Item #: 11-56752 -
'K' Cam Pillar Fairlead - MidiThese add-ons enable the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind. Stainless steel pillars add strength and wear resistance.
Availability: Back Order
Barton Marine
Item #: 11-56751 -
'K' Cam Pillar Fairlead - MiniThese add-ons enable the cam cleat to be engaged from a variety of angles. Cams can be fitted either way around to achieve a lead from in front or behind. Stainless steel pillars add strength and wear resistance.
Availability: In Stock
Barton Marine
Item #: 11-46627 -
Nylon Sliding Cleats - 165mm (6.5")A cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat.Alternatively, fit a short length of track in the desired position so that cleats can be fitted when required andremoved when not in use...
Availability: In Stock
Barton Marine
Item #: 11-46636 -
High Load Eye - 12mmManufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes.
Availability: Back Order
Barton Marine
Item #: 11-46637 -
High Load Eye - 16mmManufactured in marine grade aluminium and finished in our unique hard 'Spectro' grey anodising.These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes.
Availability: Back Order
Barton Marine
Item #: 11-56892 -
200mm Nylon Sliding Cleat - Fits 25mm T-TrackNylon Sliding Cleats - 200mmA cost-effective solution to fitting a mid-ship spring cleat where access under the side deck is limited - simplyremove a genoa track end stop, slide on the cleat and lock it in the desired position.When not in use, slide the cleat to one end of the track, or leave off one track end permanently to enable easyremoval of cleat.Alternatively, fit a short length of track in the desired position so that cleats can be fitted...
Availability: Back Order
Barton Marine
Item #: 11-56800 -
60 449 - 6mm High Load EyeManufactured in marine grade aluminium and finished in Barton's unique hard `Spectro' grey anodizing. These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes.
Availability: Back Order
Barton Marine
Item #: 11-56801 -
60 450 - 9mm High Load EyeManufactured in marine grade aluminium and finished in Barton's unique hard 'Spectro' grey anodizing. These lightweight high load eyes are suitable for a variety of uses on board, from lazy jacks, barber haulers, mast base tidies to stanchion lead eyes.
Availability: Back Order
Barton Marine
Item #: 11-46610 -
Aluminum Winch Handle - 10"All designed to fit international star sockets and standard deck filler caps.Light duty, inexpensive handles w/easy-grip roller handle and 'Spectro' grey anodised finish.Important note:These handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SWL 40kg (88.18lbs)
Availability: Back Order
Barton Marine
Item #: 11-46608 -
Aluminum Winch Handle - 8"All designed to fit international star sockets and standard deck filler caps.Light duty, inexpensive handles w/easy-grip roller handle and 'Spectro' grey anodised finish.Important note:These handles should not be used on large, two-speed winches as they are not designed for high loads in an anti-clockwise direction. SWL 40kg (88.18lbs)
Availability: Back Order
Barton Marine
Item #: 11-56756 -
Carbon Tiller Extension - 1200mmFeatures the latest in uni-directional Carbon Fiber tube which incorporatesan additional Pullwound spiral layer for optimum strength. Making itstronger than conversational Carbon fibre tube and with our custom designedfoam grip handle to reduce fatigue during long periods of use, includesTiller clip.
Availability: Back Order
Barton Marine
Item #: 11-56754 -
Carbon Tiller Extension - 700mmFeatures the latest in uni-directional Carbon Fiber tube which incorporates an additional Pullwound spiral layer for optimum strength. Making it stronger than conversational Carbon fibre tube and with our custom designed foam grip handle to reduce fatigue during long periods of use, includes Tiller clip.
Availability: Back Order
Barton Marine
Item #: 11-56755 -
Carbon Tiller Extension - 900mmFeatures the latest in uni-directional Carbon Fiber tube which incorporatesan additional Pullwound spiral layer for optimum strength. Making itstronger than conversational Carbon fibre tube and with our custom designedfoam grip handle to reduce fatigue during long periods of use, includesTiller clip.
Availability: Back Order
Barton Marine
Item #: 11-59731 -
Deck Organizer - 5 SheaveDesigned for use when leading control lines and halyards across the coach roof and back to the cockpit.This range features aluminium construction with `Spectro' grey anodized finish.Sheaves are made from moulded Acetal with hollow stainless rivets to allow easy and tidy fitting.Specifications:Length: 318mm (12.52")Width: 38mm (1.50")Height: 28mm (1.10")Weight: 465gr (16.4oz) ...
Availability: In Stock
Barton Marine
Item #: 11-50672 -
Dinghy Mast SupportDesigned to support the aft end of a dinghy mast when towing. Simply fits onto standard transom fittings and is instantly ready for use. Fully adjustable for different transom heights and features a removable pintle to accommodate different transom layouts.The yolk features a soft neoprene pad to protect the mast, shrouds and lines. Generous eyelets in the yolk allow for a securing line to be easily attached. A trailer board can be fitted to the cross plate with 2 x 6mm...
Availability: In Stock
Barton Marine
Item #: 11-46644 -
Double Rope Clutch Max Rope Diameter:Up 12mm(0.47")Fastening: 6mm x 4 (0.24" x 4)SWL:550kg (1,212.54lbs)The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.The true clutch mechanism allows line to...
Availability: Back Order
Barton Marine
Item #: 11-46643 -
Single Rope Clutch Max Rope Diameter:Up 12mm(0.47")Fastening: 6mm (0.24")SWL:550kg (1,212.54lbs)The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.The true clutch mechanism allows line to be...
Availability: In Stock
Barton Marine
Item #: 11-46645 -
Triple Rope Clutch Max Rope Diameter:Up 12mm(0.47")Fastening: 6mm x 6 (0.24" x 6)SWL:550kg (1,212.54lbs)The Barton D0550 clutch is designed for cruising and racing yachts. Manufactured from modern lightweight materials to withstand the harsh marine environment. Moulded parts are from high grade plastics which are strong, light and impact-resistant. Cams and bases are from marine grade aluminium, 'Spectro' anodised for high wear resistance and long life.The true clutch mechanism allows line to...
Availability: In Stock
Barton Marine
Item #: 11-66520 -
Drain Bung - 15mm(.60") Bore - WhiteThis screw-type drain bung only is still among the best available.Supplied with rubber ‘O’ ring for a watertight seal.
Availability: In Stock
Barton Marine
Item #: 11-59725 -
Drain Bung - 15mm (19/32')Bore - BlackThis screw-type black drain bung is still among the best available.Supplied with rubber `O' ring for a watertight seal. Specifications:Length: 15mm (19/32")weight: 7gm(.23oz)
Availability: In Stock
Barton Marine
Item #: 11-66518 -
Drain Bung & Socket - 15mm(.60") Bore - BlackThis screw-type drain bung and socket is still among the best available.Supplied with rubber ‘O’ ring for a watertight seal.
Availability: Back Order
Barton Marine
Item #: 11-66519 -
Drain Bung & Socket - 15mm(.60") Bore - WhiteThis screw-type drain bung and socket is still among the best available.Supplied with rubber ‘O’ ring for a watertight seal.
Availability: In Stock
Barton Marine
Item #: 11-46617 -
The Barton 'Wincher'(Pair)Max Drum Ø 90-100mm (3.54"-3.94")Max Rope Ø 12-16mm (0.47"-0.63")Weight 387g (13.65oz)A specially designed rubber moulding which fits over the top of standard winches, converting them to self-tailing.This simple operation works when the line is sheeted under load, which means the coils climb up the winch drum and then become gripped by the underside of the Wincher's rubber body.Cleating is achieved by locking the sheet into the Wincher's ribbed central...
Availability: In Stock
Barton Marine
Item #: 11-66517 -
Flexible Tiller JointManufactured from high tech polymers that withstands countless flexing. This joint can be easily removed from the tiller assembly by popping off the snap on cover cap.
Availability: Back Order
Barton Marine
Item #: 11-46612 -
Floating Handle - 10" LockingFeaturing a moulded body with an integral moulded handle shaft.Locking mechanism is with a positive, easy action thumb switch. Handle floats in salt and freshwater.Important note:Floating winch handles have a SWL of 40kg (88.18lbs) and are intended for lightweight use only.
Availability: Back Order
Barton Marine
Item #: 11-46613 -
Floating Handle - 8" LockingFeaturing a moulded body with an integral moulded handle shaft.Locking mechanism is with a positive, easy action thumb switch. Handle floats in salt and freshwater.Important note:Floating winch handles have a SWL of 40kg (88.18lbs) and are intended for lightweight use only.