Engine

Boosts acceleration. Reduces heat, friction and wear. Increases power. Restores engine horsepower. Cleans fuel injectors and complete fuel system in one use. Regular use helps produce benefits. Safe to use in every tankful.

MARINE Formula STA-BIL® Ethanol Treatment protects against the damaging effects of ethanol. It contains DOUBLE the corrosion protection, and 4 TIMES the fuel system cleaner of Regular STA-BIL. Removes water, and helps prevent phase separation. Recommended for use AT EVERY FILL UP.

MARINE Formula STA-BIL® Ethanol Treatment protects against the damaging effects of ethanol. It contains DOUBLE the corrosion protection, and 4 TIMES the fuel system cleaner of Regular STA-BIL. Removes water, and helps prevent phase separation. Recommended for use AT EVERY FILL UP.

MARINE Formula STA-BIL® Ethanol Treatment protects against the damaging effects of ethanol. It contains DOUBLE the corrosion protection, and 4 TIMES the fuel system cleaner of Regular STA-BIL. Removes water, and helps prevent phase separation. Recommended for use AT EVERY FILL UP.

Guaranteed to combat corrosion in combustion chambers during lay-up. From the makers of Sta-Bil. Fogging Oil with a monomolecular layer to protect internal metal surfaces. Double rust inhibitor action - both liquid and vapor phase protection. Lubricates upper combustion chamber for easier starting and longer engine life. Super atomizing formulation assures 100% coverage. For both 2 and 4 cycle engines.

America's top selling fuel stabilizer keeps fuel fresh for quick, easy starts after storage. Removes water to prevent corrosion and cleans carburetors and fuel injectors. Protects engine from gum, varnish, rust and corrosion. Prolongs engine life. Eliminates need to drain fuel before storage. For all 2 cycle and 4 cycle gasoline and diesel engines.

America's top selling fuel stabilizer keeps fuel fresh for quick, easy starts after storage. Removes water to prevent corrosion and cleans carburetors and fuel injectors. Protects engine from gum, varnish, rust and corrosion. Prolongs engine life. Eliminates need to drain fuel before storage. For all 2 cycle and 4 cycle gasoline and diesel engines.

America's top selling fuel stabilizer keeps fuel fresh for quick, easy starts after storage. Removes water to prevent corrosion and cleans carburetors and fuel injectors. Protects engine from gum, varnish, rust and corrosion. Prolongs engine life. Eliminates need to drain fuel before storage. For all 2 cycle and 4 cycle gasoline and diesel engines.

Charger Plug (male) connects to a 12V battery charger to allow simultaneous charging of two 12V batteries when plugged into the receptacle. Red.

Trolling Motor Plug (male) connects to the trolling motor. Jumpered internally to supply 12V and 24V power to the trolling motor when plugged into the receptacle. Black

2-wire ConnectPro plug uses o-ring seal for waterproof connections. Weather resistant plug cover. Ergonomic contoured grip for easy hook-up and ground blade alignment. 2-wire ConnectPro Receptacle works with 12, 24 or 36 volt 2-wire systems. For front mount panel installations. Weather resistant sealing cap. Fits standard 1-1/8" diameter mounting hole. Both plug and receptacle use corrosion resistant, plated brass electrical components and accept up to a 10 gauge wire.

2-wire ConnectPro plug uses o-ring seal for waterproof connections. Weather resistant plug cover. Ergonomic contoured grip for easy hook-up and ground blade alignment. 2-wire ConnectPro Receptacle works with 12, 24 or 36 volt 2-wire systems. For front mount panel installations. Weather resistant sealing cap. Fits standard 1-1/8" diameter mounting hole. Both plug and receptacle use corrosion resistant, plated brass electrical components and accept up to a 10 gauge wire.

2-wire ConnectPro plug uses o-ring seal for waterproof connections. Weather resistant plug cover. Ergonomic contoured grip for easy hook-up and ground blade alignment. 2-wire ConnectPro Receptacle works with 12, 24 or 36 volt 2-wire systems. For front mount panel installations. Weather resistant sealing cap. Fits standard 1-1/8" diameter mounting hole. Both plug and receptacle use corrosion resistant, plated brass electrical components and accept up to a 10 gauge wire.

The new ConnectPro™trolling motor plug and receptacle is a revolutionary new concept in trolling motor connections. The ConnectPro™ has superior electric current carrying capacity to eliminate problems that rob motors of power and reduce battery life. The ConnectPro™ system features a locking plug and receptacle with spring clamping connections which provide a secure electrical contact. Universal design for 2 or 3-wire configuration; 12, 24, 12/24, 24/36 or 36 volt systems. Watertight...

The new ConnectPro™trolling motor plug and receptacle is a revolutionary new concept in trolling motor connections. The ConnectPro™ has superior electric current carrying capacity to eliminate problems that rob motors of power and reduce battery life. The ConnectPro™ system features a locking plug and receptacle with spring clamping connections which provide a secure electrical contact. Universal design for 2 or 3-wire configuration; 12, 24, 12/24, 24/36 or 36 volt systems. Watertight...

The new ConnectPro™trolling motor plug and receptacle is a revolutionary new concept in trolling motor connections. The ConnectPro™ has superior electric current carrying capacity to eliminate problems that rob motors of power and reduce battery life. The ConnectPro™ system features a locking plug and receptacle with spring clamping connections which provide a secure electrical contact. Universal design for 2 or 3-wire configuration; 12, 24, 12/24, 24/36 or 36 volt systems. Watertight...

This new On-Board Charger Inlet is a revolutionary design in flanged inlets. The sleek design fits almost anywhere on a boat's exterior, and fishing line won't catch on the low-profile, UV resistant cap. With the inlet hard-wired to an on-board battery charger, charging can occur with all the boat's hatches closed and locked, adding convenience and security for the boater. 15A 125V straight blade inlet. Clam packaging.

Corrosion resistant receptacle made of glass reinforced nylon. Black. Will accept 8 gauge stranded wire or up to 6 gauge with ring terminals.

The new ConnectPro™trolling motor plug and receptacle is a revolutionary new concept in trolling motor connections. The ConnectPro™ has superior electric current carrying capacity to eliminate problems that rob motors of power and reduce battery life. The ConnectPro™ system features a locking plug and receptacle with spring clamping connections which provide a secure electrical contact. Universal design for 2 or 3-wire configuration; 12, 24, 12/24, 24/36 or 36 volt systems. Watertight...

30-amp 125-volt locking type 2-pole. Short housing, black nylon with internal strain relief system and recessed fasteners. Ideal for use with today's heavy-duty trolling motors.

Simple "one-push" installation. Automatically cuts its own vent hole. Automatically secures itself to cover material. Automatically seals itself from rain/snow entry.

Guaranteed to bond with wood, plastic, metal and painted surfaces. Simple "stick-on" installation, no special tools required. Lightweight, durable, all-plastic construction.

MANDO Fits: Late Model Mercruiser 12 Volt, 55 AMP Replaces: Mercruiser 817119A1 Internal regulator 2-inch mounting foot Single groove pulley included

MANDO Fits: Late Model Volvo Penta 12 Volt, 65 AMP Replaces: Volvo Penta 3856600-6, 3857561 Internal Regulator 2-inch mounting foot Single groove pulley included

Fits: Mercury Outboard 2.5L 12 Volt, 50 AMP Replaces: Mercury 881248T, 875285T1, 88955; Delco 19020703, 19020706 Internal Fan 2-inch mounting foot Multi-groove serpentine pulley included Includes wire/plug connector

Fits: O.M.C. , Cobra Replaces: Prestolite / Motorola 12 Volt, 55 AMP Internal regulator Negative ground 2-inch mounting foot Single groove pulley included

MANDO Fits: Late Model Mercruiser 12 Volt, 65 AMP Replaces: Mercruiser 805447T, 805884T Internal regulator 2-inch mounting foot Single groove pulley included

Fits: Mercruiser 3.0L 1999-UP: 12 Volt, 70 AMP Replaces: Mercury 862030T; Delco 19020600, 19020604 Internal Fan Single groove pulley included

Fits: Mercruiser 4.3L-6.2L 12 Volt, 70 AMP Replaces: Mercury 863077T; Delco 19020612 Internal Fan 50-mm multi-groove serpentine pulley included

Fits: Mercruiser, O.M.C. 12 Volt, 70 AMP Ignition protection screens Internal regulator Negative ground 2-wire plug 2-inch mounting foot Single groove pulley included

MANDO Fits: Late Model Mercruiser 12 Volt, 65 AMP Replaces: Mercruiser 807653T Internal Regulator 2-inch mounting foot Multi-groove serpentine pulley included

Fits: Mercruiser 4.3L - 8.2L 1998-Up: 12 Volt, 70 AMP Replaces: Mercury 862031T; Delco 19020601 Internal Fan 65-mm multi-groove serpentine pulley included

Fits: O.M.C. 12 Volt, 70 AMP Replaces: Prestolite Internal regulator Negative ground Single groove pulley included

Fits: Mercruiser, O.M.C. 12 Volt, 70 AMP Self exciting Ignition protection screens Internal regulator Negative ground 1-wire connection 2-inch mounting foot Single groove pulley included

Fits: Chris Craft 12 Volt, 55 AMP Negative ground 1-inch mounting foot Single groove pulley included

Fits: Mercury Outboard 3.0L 12 Volt, 50 AMP Replaces: Mercury 881247A1, 875286A1, 889956; Delco 19020704, 19020707 Internal Fan Multi-groove serpentine pulley included Includes wire/plug connector

Universal Alternator w/ Many Applications Fits: Yamaha, Marine Power, Crusader Replaces: Motorola 12 Volt, 55 AMP Internal regulator Includes: Tachometer terminal, indicator light terminal, remote battery sensing terminal, excite terminal 1-inch mounting

Mounting bolt kit Fits: 30460 starter, ?”-16 N.C. threads This kit will also fit DELCO 10MT style starters w/1 short & 1 long mounting bolt. *WILL NOT FIT metric engines.*

Mounting bolt kit for gear reduction starters Fits: ARCO 30470 starter, 2 long mounting bolts, ?”-16 N.C. threads This kit will also fit all DELCO gear reduction starters w/staggered bolt mounting pattern. *Req

High Performance: Permanent magnet gear reduction starter. Fits: Volvo Penta / Mercruiser / Marine Power 2 long bolt, staggered pattern, 14"

High Performance: Permanent magent, gear reduction starter Fits: Mercruiser / Cobra / Yamaha / Volvo Penta Replaces: See our part # quick reference for compl

*Heavy Duty* Fits: Chris Craft

*Heavy Duty* Fits: Mercruiser 470

Permanent magnet, gear-reduction starter Fits: Many Late Models 5.0L, 5.8L Fords Replaces: O.M.C 987811, Volvo 3854190-0 12 Volt, CW rotation

*High Performance* Permanent magnet Gear-reduction starter Fits: 302, 351 Fords 12 Volt, CW rotation Kit includes wiring harness to replace conventional starter.

11-tooth drive gear

8-tooth drive gear

10-tooth drive gear