Products 1-48 of 115
Show
Attwood Boaters Dry Storage Box
Retail: $20.90
Price: $18.81
View
Availability: Back Order
Attwood Marine Item #: 11-52329 -

Boater's Storage BoxKeep your maps, electronics, and other equipment safe while on the water. Perfect for use on the boat, at the dock, at home or in the field. Our O-ring lid is water-resistant and helps to seal out moisture (not intended to be 100% waterproof). The lift out tray is great for organizing small items and the flip up lid provides easy access to your stored items. The flip latch provides a secure method to keep your belongings secure.

Attwood Prop Wrench Set - Fits 17/32" to 1-1/4" Prop Nuts
Retail: $16.20
Price: $14.58
View
Availability: Back Order
Attwood Marine Item #: 11-58240 -

Prop Wrench Set - Fits 17/32" to 1-1/4" Prop NutsMultiple socket sizes for all prop maintenance.Offers multiple sockets to fit from 17/32" to 1-1/4", allowing consumers to service multiple propsBuilt of durable plasticWARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

CLC L255 53 Pocket Tech Gear Lighted Backpack
Retail: $129.00
Price: $116.10
View
Availability: In Stock
CLC Work Gear Item #: 11-52698 -

53 Pocket Tech Gear Lighted BackpackFeatures: Built-In LED light can be easily directed at work area or into tool carrier to help identify tools andparts 3 Levels of light output allow adjustment for wide area illumination or close-up work Dual compartment design for better organized tool storage 28 Tool pockets, 14 accessory pockets and 11 multi-use pockets for your favorite tools, parts and accessories 2 Cinch straps for cordless drill/driver and battery charger Padded shoulder straps and...

Davis Deluxe Rigging Knife
Retail: $24.99
Price: $22.49
View
Availability: In Stock
Davis Instruments Item #: 11-45951 -

Deluxe Rigging KnifeMade entirely of top quality stainless steel with dura-edged blades. Telo Rigging knives are tools that yachtsmen will be proud to own, yet are affordable.Deluxe Rigging Kinfe comes with a marlin spike, shackle key, and screwdriver.

Davis Snap Tool Multi-Key
Retail: $13.99
Price: $12.59
View
Availability: In Stock
Davis Instruments Item #: 11-63030 -

Snap Tool Multi-KeyA deck plate with attitude! HandyUniversalStainless SteelStrongPerfect for:FishingHikingClimbingBoatingBikingCampingSailingTailgatingRV

GROCO Spanner Wrench/Deck Plate Key
Retail: $26.75
Price: $24.07
View
Availability: Back Order
GROCO Item #: 11-75339 -

Spanner Wrench/Deck Plate Key Features:Cast bronze with stainless steel pins to fit 1/4" and 5/16" holes. Opens to service deck plates or strainer caps with key holes up to 7" apart. Hangs conveniently near the strainer(s) location.  C83600 bronze

GROCO Thru-Hull Installation Tool
Retail: $92.00
Price: $82.80
View
Availability: In Stock
GROCO Item #: 11-75342 -

Thru-Hull Installation Tool Thru Hull Installation ToolThe Concept:THT-530 makes the installation of standard GROCO thru-hull fittings possible by a single installer.  Slide the thru-hull fitting, flanged end first, over the tool.  (It will stop at the proper step.)  Tie a length of monofilament to the eye and place it into the already-cut hole in the hull of the boat.  Apply caulking to the flange of the fitting, and pull the fitting through the hole and against the...

Kuuma 3.75" Fine Edge Spring Assisted Folding Knife - Stainless Steel
Price: $11.99
View
Availability: In Stock
Kuuma Products Item #: 11-66401 -

3.75" Fine Edge Spring Assisted Folding Knife - Stainless SteelKuuma Spring Assisted Pocket Knives are easy to use with one hand. Simply pull it out of your pocket and with the flick of finger the blade opens! While open, the blade locks in place with the integral liner lock. They feature 420 stainless steel blades and belt clips and reinforced nylon handles. Great for everyday use.Features:3.75" spring assisted folding knife with fine edgeBlade made of 420 Stainless Steel, 3mm...

Kuuma 4.5" Fine Edge Spring Assisted Folding Knife - Stainless Steel
Retail: $12.99
Price: $12.78
View
Availability: In Stock
Kuuma Products Item #: 11-66399 -

4.5" Fine Edge Spring Assisted Folding Knife - Stainless SteelKuuma Spring Assisted Pocket Knives are easy to use with one hand. Simply pull it out of your pocket and with the flick of finger the blade opens! While open, the blade locks in place with the integral liner lock. They feature 420 stainless steel blades and belt clips and reinforced nylon handles. Great for everyday use.Features:4.5" spring assisted folding knife with fine edgeBlade made of 420 Stainless Steel, 3mm...

Kuuma 4.5" Serrated Edge Spring Assisted Folding Knife - Stainless Steel
Retail: $12.99
Price: $12.78
View
Availability: In Stock
Kuuma Products Item #: 11-66400 -

4.5" Serrated Edge Spring Assisted Folding Knife - Stainless SteelKuuma Spring Assisted Pocket Knives are easy to use with one hand. Simply pull it out of your pocket and with the flick of finger the blade opens! While open, the blade locks in place with the integral liner lock. They feature 420 stainless steel blades and belt clips and reinforced nylon handles. Great for everyday use.Features:4.5" spring assisted folding knife with serrated edgeBlade made of 420 Stainless Steel, 3mm...

Sea-Dog Add-A-Snap - Black - 1-1/2"
Retail: $4.99
Price: $4.49
View
Availability: Back Order
Sea-Dog Item #: 11-77169 -

Add-A-Snap - Black - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

Sea-Dog Add-A-Snap - Black - 2-1/2"
Retail: $5.49
Price: $4.94
View
Availability: Back Order
Sea-Dog Item #: 11-77171 -

Add-A-Snap - Black - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

Sea-Dog Add-A-Snap - Black - 4"
Retail: $5.99
Price: $5.39
View
Availability: Back Order
Sea-Dog Item #: 11-77173 -

Add-A-Snap - Black - 4" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

Sea-Dog Add-A-Snap - White - 1-1/2"
Retail: $4.99
Price: $4.49
View
Availability: In Stock
Sea-Dog Item #: 11-77170 -

Add-A-Snap - White - 1-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

Sea-Dog Add-A-Snap - White - 2-1/2"
Retail: $5.49
Price: $4.94
View
Availability: In Stock
Sea-Dog Item #: 11-77172 -

Add-A-Snap - White - 2-1/2" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

Sea-Dog Add-A-Snap - White - 4"
Retail: $5.99
Price: $5.39
View
Availability: Back Order
Sea-Dog Item #: 11-77184 -

Add-A-Snap - White - 4" For use with canvas or nylon boat covers, the Add-A-Snap allows you to easily add length on hard to reach snaps from shrunken material. Nickel plated brass/nylon.

Sea-Dog Canvas Snap Tool
Retail: $29.95
Price: $26.95
View
Availability: Back Order
Sea-Dog Item #: 11-77168 -

Canvas Snap Tool Canvas Snap Tool includes a die wrench and three removable dies for various snap caps and studs. Great addition to any tool box. Aluminum/steel construction. Not for use with heavy duty stainless canvas snaps. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

Sea-Dog Emergency Deck Fill Plug
Retail: $12.99
Price: $11.69
View
Availability: Back Order
Sea-Dog Item #: 11-80009 -

Emergency Deck Fill PlugNitrile-Buna RubberThis Emergency Deck Fill Plug is a must for any vessel. Fits most 1-1/2" hose deck fills in the event you lose your cap. For temporary use only until you can replace your OEM cap. Constructed of fuel resistant Nitrile-Buna rubber. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

Sea-Dog Heavy Duty Canvas & Upholstery Scissors - 304 Stainless Steel/Injection Molded Nylon
Retail: $29.99
Price: $26.99
View
Availability: Back Order
Sea-Dog Item #: 11-82963 -

Heavy Duty Canvas & Upholstery Scissors - 304 Stainless Steel/Injection Molded Nylon These quality stainless steel Heavy Duty Canvas & Upholstery Scissors are designed with offset handles to allow the blades to hug the work surface, giving you clean and precise cutting characteristics with both thin and thick materials. Constructed with a heavy duty stainless steel blade for optimum performance and long-lasting sharpness. Fine, precision-ground, serrated edge ensures effortless...

Sea-Dog Inboard Motor Flush
Retail: $19.99
Price: $17.99
View
Availability: Back Order
Sea-Dog Item #: 11-80005 -

Inboard Motor FlushMolded Rubber/Aluminum Inboard Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system extending the engine’s service life. Easy-to-use by fitting the rubber cup over the water intake, connecting a garden hose, and extending the aluminum leg to seal the cup to the hull. Fresh water flushes the cooling system, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an...

Sea-Dog Motor Flush Ear Muff
Retail: $8.99
Price: $8.09
View
Availability: Back Order
Sea-Dog Item #: 11-77115 -

Motor Flush Ear Muff Outboard motor flushers quickly flush away salt, sand, minerals and contaminates from your lower unit cooling system extending the engine’s service life. Easy to use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups and other maintenance that requires running an outboard engine out of the water.WARNING: This product can expose...

Sea-Dog Multi-Tool w/Knife Blade - 304 Stainless Steel
Retail: $16.99
Price: $15.29
View
Availability: In Stock
Sea-Dog Item #: 11-82962 -

Multi-Tool with Knife Blade - 304 Stainless SteelThis handy Multi-Tool includes a knife, needle nose pliers, cutters, scissors, various screw drivers, bottle opener, file, and saw. Constructed of corrosion resistant stamped 304 stainless steel. A must have for every tool bag! Includes canvas carrying case.

Sea-Dog Plastic Suction Cup Handle
Retail: $23.99
Price: $21.59
View
Availability: Back Order
Sea-Dog Item #: 11-80010 -

Plastic Suction Cup HandleInjection Molded Nylon/Nitrile-Buna Rubber Portable, dual suction cup handle installs instantly. Mounts in any direction on any non-porous surface. Easily mount and re-mount with no marks or damage to hull. No holes, screws, or tools required. Ideal for cleaning waterlines or boat bottoms while swimming or from a dinghy. Attach to your paddleboard or kayak for an extra handle during transport. For use above or below the waterline. Constructed of non-corrosive...

Sea-Dog Rectangular Motor Flush
Retail: $9.99
Price: $8.99
View
Availability: In Stock
Sea-Dog Item #: 11-80004 -

Rectangular Motor FlushMolded PVC/Painted Steel Outboard Rectangular Motor Flush quickly flushes away salt, sand, minerals, and contaminates from your lower unit cooling system, extending the engine’s service life. Easy-to-use molded PVC cups deliver fresh water to flush the cooling system through side intakes on the lower unit. Simple garden hose connection, no tools required. Great for winterizing, tune-ups, and other maintenance that requires running an outboard engine out of the...

Sea-Dog Rigging Knife - 304 Stainless Steel
Retail: $20.99
Price: $18.89
View
Availability: In Stock
Sea-Dog Item #: 11-82961 -

Rigging Knife - 304 Stainless SteelThis handy Rigging Knife includes a sharp blade, Marlin spike, shackle key, screw driver, bottle opener, and a loop to attach a lanyard (not included). Constructed of corrosion resistant 304 stainless steel. A great addition to any tool box.

Sea-Dog Stainless Steel Bottle Opener w/Brushed Finish
Retail: $19.95
Price: $17.95
View
Availability: Back Order
Sea-Dog Item #: 11-77180 -

Stainless Steel Bottle Opener with Brushed Finish Corrosion resistant investment cast 316 stainless steel bottle opener wall mounts with two #6 FH fasteners (not included).WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

Seaguard Marine Digital Corrosion Professional Tester w/Silver & Silver Chloride Reference Cell (SSC)
Retail: $500.00
Price: $450.00
View
Availability: In Stock
Seaguard International Item #: 11-74862 -

Marine Digital Corrosion Professional Tester with Silver & Silver Chloride Reference Cell (SSC)The corrosion protection system on your boat should be checked at regular intervals. Failure to do so can lead to a costly and time consuming repair. Seaguard Digital Corrosion Tester is designed to be used by boat owners or marine operators.Features:Quick response timeColor test resultEasy to use and customizeChoose between a Standard and PRO modelQuick release lock connectors for both the...

Seaguard Marine Digital Corrosion Standard Tester w/Zinc Reference Cell (ZRE)
Retail: $340.00
Price: $306.00
View
Availability: In Stock
Seaguard International Item #: 11-74861 -

Marine Digital Corrosion Standard Tester with Zinc Reference Cell (ZRE)The corrosion protection system on your boat should be checked at regular intervals. Failure to do so can lead to a costly and time consuming repair. Seaguard Digital Corrosion Tester is designed to be used by boat owners or marine operators.Features:Quick response timeColor test resultEasy to use and customizeChoose between a Standard and PRO modelQuick release lock connectors for both the reference cell and the alligator...

T-H Marine Prop Master Prop Stop Propeller Stop
Retail: $12.99
Price: $11.69
View
Availability: In Stock
T-H MARINE SUPPLIES Item #: 11-83722 -

Prop Master Prop Stop Propeller StopFeatures:Simple to useSecurely holds prop during changingMakes prop-changing saferBrightly colored for greater visibility (Remember to remove propeller stop before using your boat)WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

T-H Marine Prop Master Propeller Wrench
Retail: $19.99
Price: $17.99
View
Availability: In Stock
T-H MARINE SUPPLIES Item #: 11-81721 -

Prop Master Propeller WrenchThe Prop Master™ is the original molded propeller wrench.This 1-1/16" six point socket style prop wrench is made of high tensile strength, indestructible nylon. It is totally resistant to fuel, sun, salt water, and other chemicals. The Prop Master™ is less expensive than metal wrenches which rattle and can cause damage to your boat. However, it has plenty of brawn to get the job done. The Prop Master™ will tighten all 1 1/16" propeller nuts without...

Weld Mount .75" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15
Retail: $20.78
Price: $18.70
View
Availability: In Stock
Weld Mount Item #: 11-48803 -

.75" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a .75" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs. ...

Weld Mount .75" Tall Stainless Standoff Through Thread w/#10 x 24 Threads - Qty. 6
Retail: $68.37
Price: $61.53
View
Availability: Back Order
Weld Mount Item #: 11-48822 -

.75" Tall Stainless Standoff w/#10 x 24 Threads - Through-ThreadUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in...

Weld Mount .75" Tall Stainless Standoff Through Thread w/5/16" x 8 Threads - Qty. 6
Retail: $70.37
Price: $63.33
View
Availability: Back Order
Weld Mount Item #: 11-48820 -

.75" Tall Stainless Standoff w/5/16" x 8 Threads - Through-ThreadUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in...

Weld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15
Retail: $24.31
Price: $21.88
View
Availability: In Stock
Weld Mount Item #: 11-48804 -

1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a 1" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs. ...

Weld Mount 1" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10
Retail: $30.85
Price: $27.77
View
Availability: In Stock
Weld Mount Item #: 11-48812 -

1" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels, through deck mounts and many other uses.

Weld Mount 1.25" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15
Retail: $26.27
Price: $23.64
View
Availability: In Stock
Weld Mount Item #: 11-48805 -

1.25" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a 1.25" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs. ...

Weld Mount 1.25" Tall Stainless Stud w/#10 x 24 Threads - Qty. 10
Retail: $28.50
Price: $25.65
View
Availability: Back Order
Weld Mount Item #: 11-48808 -

1.25" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

Weld Mount 1.5" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Threads - Qty. 15
Retail: $27.84
Price: $25.06
View
Availability: Back Order
Weld Mount Item #: 11-48806 -

1.5" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a 1.5" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs. ...

Weld Mount 1.5" Tall Stainless Steel Stud w/#10 x 24 Threads - Qty. 10
Retail: $30.85
Price: $27.77
View
Availability: Back Order
Weld Mount Item #: 11-48809 -

1.5" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

Weld Mount 1.5" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10
Retail: $36.08
Price: $32.47
View
Availability: In Stock
Weld Mount Item #: 11-48813 -

1.5" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels, through deck mounts and many other uses.

Weld Mount 1.5" Tall Stainless Stud w/5/16" x 18 Threads - Qty. 5
Retail: $53.59
Price: $48.23
View
Availability: In Stock
Weld Mount Item #: 11-48818 -

1.5" Tall Stainless Stud w/5/16" x 18 ThreadThe HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2" base plate creating a very strong part. Manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs. and shear strength is 1,500 lbs.

Weld Mount 1.75" Tall Stainless Stud w/1/4" x 20 Thread - Qty. 10
Retail: $42.88
Price: $38.59
View
Availability: Available
Weld Mount Item #: 11-48814 -

1.75" Tall Stainless Stud with 1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels, through deck mounts and many other uses.

Weld Mount 2" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10
Retail: $47.32
Price: $42.59
View
Availability: Back Order
Weld Mount Item #: 11-48815 -

2" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels, through deck mounts and many other uses.

Weld Mount 2" Tall Stainless Stud w/3/8" x 16 Threads - Qty. 5
Retail: $61.70
Price: $55.53
View
Availability: In Stock
Weld Mount Item #: 11-48817 -

2" Tall Stainless Stud w/3/8" x 16 ThreadThe HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2" base plate creating a very strong part. Manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs. and shear strength is 1,500 lbs.

Weld Mount 2.25" Tall Stainless Stud w/#10 x 24 Threads - Qty. 10
Retail: $44.71
Price: $40.24
View
Availability: Back Order
Weld Mount Item #: 11-48810 -

2.25" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

Weld Mount 2.5" Tall Stainless Stud w/1/4" x 20 Threads - Qty.10
Retail: $51.76
Price: $46.58
View
Availability: Back Order
Weld Mount Item #: 11-48816 -

2.5" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels, through deck mounts and many other uses.

Weld Mount 8040 Acrylic Adhesive w/Plunger
Retail: $19.71
Price: $17.74
View
Availability: In Stock
Weld Mount Item #: 11-79507 -

8040 Acrylic Adhesive with Plunger CANNOT SHIP AIR - UPS GROUND ONLYAT-8040 is a good general purpose adhesive packaged in a manual plunger cartridge. Simply snip off the two end caps and dispense the needed amount of adhesive onto a clean surface and mix it by hand. AT-8040 cures in 10-12 minutes, has a 6 minute working time and develops working strength in 40 minutes. AT-8040 has a 12 month shelf life when stored at 72°. Weld Mount recommends that where ever possible this adhesive...

Weld Mount Adhesively Bonded Fastener Kit w/AT 8040 Adhesive
Retail: $166.64
Price: $149.98
View
Availability: In Stock
Weld Mount Item #: 11-57601 -

Adhesively Bonded Fastener Kit with AT 8040 AdhesiveKit Contains:(1) Plano Storage Box - 11" x 7.25" x 2.75"(50) AT-5 Tie Mount (White)(1) AT-8040 Adhesive(5) AT-850 Mixing Tip(1) AT-300 Dispensing Gun(2) AT-113B Black Footmans Loop(4) ST125-1420-16 Stainless Stud ...