Products 1-24 of 92
Show
Weld Mount 1.25" Tall Stainless Stud w/#10 x 24 Threads - Qty. 10
Retail: $28.50
Price: $25.65
View
Availability: In Stock
Item #: 11-48808 -

1.25" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.

Weld Mount AT-3B Small Black Nylon Wire Tie Mount - Qty. 100
Retail: $52.51
Price: $47.26
View
Availability: In Stock
Item #: 11-48799 -

Black Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in black nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. ...

Weld Mount Single Poly Clamp f/1/4" x 20 Studs - 3/8" OD - Requires 1" Stud - Qty. 25
Retail: $29.63
Price: $26.67
View
Availability: Back Order
Item #: 11-48832 -

Single ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 0.375" Stud Required: ST125-1420-16SS Clamp Dimensions L/W/D: 1.06" x 0.63" x 0.56" Recommended Clamp Spacing: 3'

Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 50
Retail: $38.82
Price: $34.94
View
Availability: Back Order
Item #: 11-48792 -

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Weld Mount 1" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10
Retail: $30.85
Price: $27.77
View
Availability: In Stock
Item #: 11-48812 -

1" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels, through deck mounts and many other uses.

Weld Mount AT-5 Large White Nylon Wire Tie Mount - Qty. 100
Retail: $64.96
Price: $58.46
View
Availability: Back Order
Item #: 11-48793 -

White Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Weld Mount 2.5" Tall Stainless Stud w/1/4" x 20 Threads - Qty.10
Retail: $51.76
Price: $46.58
View
Availability: In Stock
Item #: 11-48816 -

2.5" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels, through deck mounts and many other uses.

Weld Mount AT-9 Aluminum Wire Tie Mount - Qty. 100
Retail: $118.89
Price: $107.00
View
Availability: Available
Item #: 11-48826 -

Aluminum Wire TieUsed with Stainless Steel or Nylon wire ties up to 0.4 inches wide. 250 lbs tensile strength when bonded with AT-6030 adhesive manufactured of 5052 marine grade aluminum for UV and salt water resistance. Ideal alternative to welding or drilling and tapping to mount hoses, conduit, etc.

Weld Mount AT-300 Adhesive Dispensing Gun f/AT-2010 & AT-4020
Retail: $85.91
Price: $77.32
View
Availability: In Stock
Item #: 11-48779 -

Adhesive Dispensing GunThe AT-300 Adhesive dispensing gun has a 1:1 plunger for use with AT-2010 and AT-4020 50ml cartridges. When using AT-6030 adhesive it requires AT-12 (10 to 1 plunger). Replacement plungers are also available.

Weld Mount Square Mixing Tips f/AT-6030,AT-2010,& AT-4020
Retail: $86.96
Price: $78.26
View
Availability: Back Order
Item #: 11-48783 -

Adhesive Mixing Tip For AT-6030Our AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips minimize waste compared with traditional 6" mixing tips. pkg contains 50 mixing tips.

Weld Mount AT-7 Aluminum Base Swivel Tie Mount - Qty. 25
Retail: $77.78
Price: $70.00
View
Availability: Back Order
Item #: 11-48823 -

Aluminum Base Wire Tie MountThis tie mount is provided with an anodized aluminum base with a nylon tie mount which is riveted to the base. The nylon mount swivels 360 degrees making alignment with the wire harness easier. This tie mount is designed for a #5 wire tie and has an average pull strength of 150 lbs.

Weld Mount .75" Tall Stainless Standoff Through Thread w/#10 x 24 Threads - Qty. 6
Retail: $68.37
Price: $61.53
View
Availability: Back Order
Item #: 11-48822 -

.75" Tall Stainless Standoff w/#10 x 24 Threads - Through-ThreadUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in...

Weld Mount AT-5B Large Black Nylon Wire Tie Mount - Qty. 50
Retail: $38.82
Price: $34.94
View
Availability: In Stock
Item #: 11-48794 -

Black Nylon Wire Tie MountThe AT-5 tie mount is designed to be set into wet resin during the hull lay up or bonded with our acrylic adhesives. It's designed for a #5 wire tie and has an average pull strength of 150 lbs. It's approved for submerged bilge applications. Stop putting plywood in your hull just to have a place to drive wire tie screws. Saves material and labor costs!

Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 100
Retail: $52.51
Price: $47.26
View
Availability: Back Order
Item #: 11-48797 -

White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. ...

Weld Mount 1" Tall Stainless Panel Stud w/0.62" Base & #8 x 32 Thread - Qty. 15
Retail: $24.31
Price: $21.88
View
Availability: In Stock
Item #: 11-48804 -

1" Tall Stainless Stud w/#8 x 32 ThreadOur Small Stainless Steel Panel Studs have a wide range of uses. Originally they were used for mounting on the backside of dash panels for mounting to the console. Now they are used for securing a wide range of wire clamps and other small components to composite surfaces. The base plate is 0.62" in diameter with a 1" tall stud. Tensile strength is 300 lbs. and shear strength is 375 lbs. Maximum torque load is 45 inch/lbs. ...

Weld Mount .75" Tall Stainless Standoff Through Thread w/5/16" x 8 Threads - Qty. 6
Retail: $70.37
Price: $63.33
View
Availability: Back Order
Item #: 11-48820 -

.75" Tall Stainless Standoff w/5/16" x 8 Threads - Through-ThreadUnlike the SOB standoffs which have a blind thread, the SOT series standoffs have a thread which runs all the way through the barrel of the standoff. This allows the standoff to be mounted from either side of the base. These parts are manufactured in 316 stainless steel making them suitable for deck applications. This standoff is inertial (friction) welded to the base yielding a very strong part. The bases are all 1.25" in...

Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 50
Retail: $32.60
Price: $29.34
View
Availability: In Stock
Item #: 11-48796 -

White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. ...

Weld Mount White Nylon 1.25" Stud Cover f/1/4" x 20 Stud - Qty. 50
Retail: $42.20
Price: $37.98
View
Availability: Back Order
Item #: 11-48829 -

Stud CoversFor applications such as engine rooms where our stainless steel studs may be visible, use these press-on white nylon caps to improve the appearance of the installation. The caps are "Matterhorn White". Install the caps before bonding up the studs. 1.25" Diameter.

Weld Mount AT-3 Small White Nylon Wire Tie Mount - Qty. 30
Retail: $17.67
Price: $15.90
View
Availability: In Stock
Item #: 11-48790 -

White Nylon Wire Tie MountThe AT-3 tie mount is smaller for panel and other small space applications. This part is molded in white nylon and is sized for a #3 wire tie with a maximum width of .20". Average pull strength is about 50 lbs. The square base measures .44" wide. Use this smaller wire tie for runs with only a few wires or where space prevents use of our larger tie mounts. Excellent for mounting compass wires on center console boats and for overhead panel runs. ...

Weld Mount 2" Tall Stainless Stud w/3/8" x 16 Threads - Qty. 5
Retail: $61.70
Price: $55.53
View
Availability: In Stock
Item #: 11-48817 -

2" Tall Stainless Stud w/3/8" x 16 ThreadThe HS200 stud is designed for heavy load applications such as mounting filters and panels. Thestud is inertial (friction) welded to a 2" base plate creating a very strong part. Manufactured of 304 stainless steel. Tensile strength is approximately 1,200 lbs. and shear strength is 1,500 lbs.

Weld Mount 2" Tall Stainless Stud w/1/4" x 20 Threads - Qty. 10
Retail: $47.32
Price: $42.59
View
Availability: Back Order
Item #: 11-48815 -

2" Tall Stainless Stud w/1/4" x 20 ThreadMounts to virtually any surface using the AT-4010 Acrylic Adhesive. This is a structural part with 500 lbs. of tensile strength and 650 lbs. in shear. All studs have 1/4" x 20 threads. Use for hanging panels, through deck mounts and many other uses.

Weld Mount Mixing Tips f/Use w/AT-6030,AT-2010, & AT-4020
Retail: $18.91
Price: $17.02
View
Availability: In Stock
Item #: 11-48787 -

Adhesive Mixing Tip For AT-6030Our AT-650 mixing tip is designed specifically for use with our AT-6030 adhesive. AT-6030 is a 10 to 1 adhesive which requires a mixing tip with more mixing chambers to insure proper mixing before use. These mixing tips minimize waste compared with traditional 6" mixing tips. pkg contains 10 mixing tips.

Weld Mount Double Poly Clamp f/1/4" x 20 Studs - 3/4" OD - Requires 1.75" Stud - Qty. 25
Retail: $81.48
Price: $73.33
View
Availability: Back Order
Item #: 11-48841 -

Double ClampEach clamp is designed to be mounted using 1/4" x 20 Weld Mount studs. The clamps are manufactured in black polypropylene and are temperature rated for -22 to +194 degrees F continuous service.Features: Hose OD: 0.75" Stud Required: ST125-1420-28SS Clamp Dimensions L/W/D: 1.65" x 0.79" x 1.18" Recommended Clamp Spacing: 4'

Weld Mount 1.5" Tall Stainless Steel Stud w/#10 x 24 Threads - Qty. 10
Retail: $30.85
Price: $27.77
View
Availability: In Stock
Item #: 11-48809 -

1.5" Tall Stainless Stud w/#10 x 24 ThreadUtilize the same base as the 1.4" x 20 studs but with a smaller threaded stud inserted into the base. These studs are ideal for mounting wire clamps and securing items which require a smaller stud diameter. These studs can be bonded from either surface of the base plate.