Products 1-24 of 217
Show
C.E. Smith Stainless Steel Flush Mount Rod Holder - 15 Degree
Retail: $173.99
Price: $130.96
View
Availability: In Stock
Item #: 11-30232 -

Stainless SteelFlush MountSwivel Rod Holders80 Series15°10-1/2" Length1-7/8" IDSwivel base ideal for bent butt rod fishingSwivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fishCast 1-piece stainless steel swivel cupSuper smooth turning precision-machined 1/2" pivot with fine threads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer,...

C.E. Smith Replacement Liner f/70 Series Flush Mount - White
Retail: $19.99
Price: $11.87
View
Availability: In Stock
Item #: 11-29093 -

Replacement liner for 70 series in-gunnel rod holder, 9-5/8" long, cut to desired angle and length. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

C.E. Smith Stainless Steel Flush Mount Rod Holder - 0 Degree
Retail: $173.99
Price: $130.96
View
Availability: In Stock
Item #: 11-30231 -

Stainless SteelFlush MountSwivel Rod Holders80 Series0°10-1/2" Length1-7/8" IDSwivel base ideal for bent butt rod fishingSwivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fishCast 1-piece stainless steel swivel cupSuper smooth turning precision-machined 1/2" pivot with fine threads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth...

C.E. Smith Adjustable Mid Mount Rod Holder f/1-5/16" OD - Silver
Retail: $157.95
Price: $133.20
View
Availability: In Stock
Item #: 11-29080 -

C.E. Smith Adjustable Mid Mount Rod Holder f/1-5/16" OD - SilverWith invisible adjustment for great looks, these investment-cast 316 stainless steel clamp-ons moutn at any angle. Set the clamp to any position in 10° increments to angle your rod exactly where you want it. Strong four-screw mounting clamp resists slipping.Includes a heavy vinyl liner to protect rods and features an integrally-cast gimbal pin for strength.Features:Clamp angle adjusts in 10° incrementsHidden...

C.E. Smith Flush Mount Rod Holder - 30 Degree 10.5" Deep
Retail: $139.99
Price: $105.65
View
Availability: Back Order
Item #: 11-29092 -

Stainless Steel Rod HoldersWith 1/2" Pipe Threaded Drain HoleThese larger 80C series models feature a beautifully rounded cast bottom end with a 1/2" Pipe Threaded Drain Hole. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner protects rods...

C.E. Smith Mid Mount 2-Way Clamp Rod Holder - Silver - 1-1/2"
Retail: $119.99
Price: $105.59
View
Availability: In Stock
Item #: 11-29084 -

2-WAY CLAMPStainless Steel Rod HoldersFINISH:SilverMOUNTMidFITS STAINLESS TUBE SIZE*1-1/2" actual OD tube using included sleeve 53661S2)FITS ALUMINUM PIPE SIZE**1-1/4" schedule 40 pipeInvestment-cast 316 stainless steelUnique clamping system will rotate for either horizontal or vertical mountingStrong integrally-cast gimbal barSized to fit stainless tube or aluminum pipeStrong investment-cast 316 stainless steel rod holders with a sleek, swept-back look offer maximum corrosion...

C.E. Smith Adjustable Clamp-On Rod Holder w/Black PVC Liner
Retail: $54.99
Price: $51.33
View
Availability: In Stock
Item #: 11-36741 -

Adjustable Clamp-On Rod HolderStrongest clamp in its class.Never before has a moderately priced adjustable clamp-on combined such a strong clamp with innovative smooth styling. Solid cap protects your rails from dents often caused by inferior adjustable rod holders.Our clamp fits any rail between 3/4" OD to 1-1/16" OD.Made from 304 stainless steel tube lined with a UV resistant black PVC and fitted with a chrome zinc alloy adjustable clamp.Angle from the rail adjusts in 15 degree increments.9"...

C.E. Smith Flush Mount Rod Holder - 30 Degree
Retail: $76.99
Price: $64.19
View
Availability: In Stock
Item #: 11-29089 -

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of...

C.E. Smith Stainless Steel Flush Mount Rod Holder - 30 Degree
Retail: $173.99
Price: $130.96
View
Availability: Back Order
Item #: 11-30233 -

Stainless SteelFlush MountSwivel Rod Holders80 Series30°10-1/2" Length1-7/8" IDSwivel base ideal for bent butt rod fishingSwivels to follow the fish without removing the rod from the rod holder. Great for tuna or other large fishCast 1-piece stainless steel swivel cupSuper smooth turning precision-machined 1/2" pivot with fine threads WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer,...

C.E. Smith Drop-in Swivel
Retail: $59.99
Price: $42.23
View
Availability: In Stock
Item #: 11-49867 -

Drop-in SwivelDrop-in Swivel instantly converts any in-gunnel rod holder to a swivel rod holder. Fits inside any rod holder with 1-9/16" or larger inside diameter. Investment cast 316L stainless construction. Smooth turning adjustable swivel resistance.Great for:Fast trolling heavy baitsBottom fishing with electric reelsBent butt rodsFighting big fish from the rod holder WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of...

C.E. Smith Flush Mount Rod Holder - 30 Degree 9" Depth
Retail: $115.99
Price: $79.19
View
Availability: In Stock
Item #: 11-33228 -

FLUSH MOUNTStainless Steel Rod HoldersWith 1/2" Threaded DrainThese larger 70C series models feature a beautifully rounded cast bottom end with a 1/2" tapered pipe threaded drain. Use them when the bottom of the rod holder must have a decorative appearance, or add a drain tube and use when there is dry storage space under the rod holder.They feature a super tough cast stainless steel gimbal bar designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl liner...

C.E. Smith Optional Sleeve f/53661A & 53661GA
Retail: $9.99
Price: $6.64
View
Availability: Available
Item #: 11-29086 -

Replacement insulator sleeves for rod holder model numbers: 53661A, 53661GA

C.E. Smith Tournament 3 Rod Rack - White
Retail: $27.99
Price: $17.15
View
Availability: Back Order
Item #: 11-42946 -

White Tournament 3 Rod Rack55110ATournament Rod Rack stores 3 rods, tackle and tools.There is never enough rod storage at home or on the boat. Expensive fishing rods get damaged standing in a corner. Organize your prized rods with these economical and UV resistant rod racks. One piece molded polypropylene construction is tough and corrosion free. Features 3 rod holders, 7 lure hanging holes, one knife storage slot and one pliers slot. 11" tall and 12-1/2" wide. Stainless mounting screws...

C.E. Smith Pontoon Square Rail Adjustable Clamp-On Rod Holder
Retail: $85.95
Price: $58.07
View
Availability: In Stock
Item #: 11-49868 -

Pontoon Square Rail Adjustable Clamp On Rod HolderAll the same great features as the 304L stainless adustable clamp-on (55105A) with a clamp made to fir the square rails found on pontoon boats. Each rod holder comes with 2 protective liners, one to fit 1" and one to fit 1-1/4" square rail. The liners are round on the outside allowing the rod holder to be adjusted to any angle above the water, and the hidden left or right adjustment allows even more adjustment choices. Our clamp fits 1" to...

C.E. Smith Backing Plate f/80 Series Rod Holders
Retail: $24.99
Price: $23.30
View
Availability: In Stock
Item #: 11-33220 -

Backing Plate f/80 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80...

C.E. Smith Replacement Liner f/80 Series Flush Mount - White
Retail: $10.99
Price: $6.59
View
Availability: In Stock
Item #: 11-29095 -

Replacement liner for 80 series in-gunnel rod holder, 11" long, cut to desired angle and length. WARNING: This product can expose you to chemicals including di(2-ethylhexyl)phthalate (dehp) which is known to the State of California to cause cancer, birth defects or other reproductive harm. For more information go to P65Warnings.ca.gov. ...

C.E. Smith Backing Plate f/70 Series Rod Holders
Retail: $24.99
Price: $21.13
View
Availability: In Stock
Item #: 11-33219 -

Backing Plate f/70 Series Rod HoldersBacking plates are very important to have under every rod holder used for heavy tackle fishing. When the rod holder is under extreme load, regular nuts and washers can concentrate stress and cause spider cracking around your rod holders or perhaps even tear through causing severe gunnel damage. Smith backing plates distribute mounting bolt pressure evenly over 30 times more surface area than with standard washers alone. 2 sizes, one for 70 series and 80...

C.E. Smith Flush Mount Rod Holder - 15 Degree
Retail: $76.99
Price: $64.19
View
Availability: In Stock
Item #: 11-29088 -

FLUSH MOUNTStainless Steel Rod HoldersTough enough for heavy tackleMade of 100% 316 stainless steel, these flush mount gunnel rod holders feature an extra large, low profile cap to enhance the appearance of any boat.They feature a super tough stainless steel gimbal bar welded in place designed to hold up to the punishment of downriggers or heavy tackle. A white vinyl linder protects rods and is keyed with the gimbal bar so the liner stays in place.Standard 70 Series models have a tube depth of...

C.E. Smith Tournament 2 Rod Rack - White
Retail: $20.99
Price: $10.55
View
Availability: In Stock
Item #: 11-49869 -

Tournament 2 Rod Rack - WhiteOrganize your prized rods with this economical and UV resistant rod rack. One piece molded polypropylene construction is tough and corrosion free. Features 2 rod holders, 4 lure hanging holes, and 1 knife storage slot. It is 11" tall x 8-3/4" wide and stands 2-1/2" off the mounting surface. Rod Holder Tube ID 1-13/16"Screw Outside Diameter 3/16"Drill For Screw 1/8"Mounting Hole Horizontal Centers 7-15/16"Mounting Hole Vertical Centers 4-1/2"Stainless mounting...

C.E. Smith Aluminum Clamp-On Rod Holder - Horizontal - 1.05" OD - Fits 3/4" Pipe
Retail: $114.99
Price: $75.54
View
Availability: In Stock
Item #: 11-62244 -

Aluminum Clamp-On Rod Holder - Horizontal - 1.05" OD - Fits 3/4" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner...

C.E. Smith Aluminum Clamp-On Rod Holder - Horizontal - 1.315" OD - Fits 1" Pipe
Retail: $114.99
Price: $76.96
View
Availability: In Stock
Item #: 11-62246 -

Aluminum Clamp-On Rod Holder - Horizontal - 1.315" OD - Fits 1" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner...

C.E. Smith Aluminum Clamp-On Rod Holder - Vertical - 1.315" OD - Fits 1" Pipe
Retail: $114.99
Price: $82.09
View
Availability: In Stock
Item #: 11-62247 -

Aluminum Clamp-On Rod Holder - Vertical - 1.315" OD - Fits 1" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner...

C.E. Smith Aluminum Clamp-On Rod Holder - Horizontal - 1.66" OD - Fits 1-1/4" Pipe
Retail: $114.99
Price: $77.44
View
Availability: In Stock
Item #: 11-62248 -

Aluminum Clamp-On Rod Holder - Horizontal - 1.66" OD - Fits 1-1/4" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper...

C.E. Smith Aluminum Clamp-On Rod Holder - Vertical - 1.66" OD - Fits 1-1/4" Pipe
Retail: $114.99
Price: $76.96
View
Availability: In Stock
Item #: 11-62249 -

Aluminum Clamp-On Rod Holder - Vertical - 1.66" OD - Fits 1-1/4" PipeSmith's line of high polished aluminum clamp-on rod holders offer a great alternative to stainless steel. These rod holders are constructed of marine grade aluminum that has been 100% anodized for functionality and style.These rod holders feature a super strong 3/8" thick blade, rugged welded 1/3" tall gimbal bar, and a 1-5/8" inside diameter with a flared opening to make it easy to insert a rod in the holder. The taper liner...